Eizo 531L - Manual (Page 20)

English
20
3. SETTING UP THE eClient
10.
Local Printer Setup page is displayed.
NOTE
• The following is required to install a local printer;
* A printer is connected to the printer port or the serial connector of the eClient.
* An RDP protocol is used for connection to a WTS.
* Microsoft Windows 2000 Server / Advanced Server / Datacenter Server is
installed in a WTS
• A Local Printer mentioned here is a printer connected directly to the Parallel
Connector of the unit.
Select [Yes] when using a local printer.
Select [No] in the following cases:
* When not using a Local Printer
* When using a ICA protocol for connection to a Server
* When the OS of the Server is Windows NT Server 4.0 Terminal Server
Edition
Click [Next>] when finished.
Refer to step 11 if selecting [Yes].
Refer to step 17 if selecting [No].