Eizo 531L - Manual (Page 82)

English
82
6. USING THE TERMINAL PROPERTIES
CANCELING SETTINGS
1.
Display “Terminal Connection Manager”.
2.
Press [Ctrl], [A], and [F2] at the same time.
3.
“Enter Security Password” dialog box is displayed.
[Password:] .........................Enter the password
Click [OK] on [Enter Security Password] when finished.
4.
All settings in the “Terminal Properties” will be active.
Click the [Security Enable] check box on the [System] tab and remove the check
mark.
Click [OK] on the “Terminal Properties” to save the settings and close the “Terminal
Properties”. Security becomes canceled.
Administration Console
Assign the eClient a server with the Network Administrator, utility software for eClient.
Other servers with the Network Administrator will not be able to control the eClient
after setting the administration console.
[Administration Console]....assign an IP address of a server with the Network
Administrator.