Eizo 531L - Manual (Page 42)

English
42
4. ADDING & CHANGING A CONNETION NAME
4.
Citrix Server or published application selection page is displayed.
1) Select [Server] (WTS) or [Published Application].
2) Click [Server Location…].
[Server Group]................Select the WTS Group to connect. (A WTS Group
consists of [Primary], [Backup 1], and [Backup 2].
The WTS will be searched in order of [Primary],
[Backup 1], and [Backup 2].
[Add] ...............................Add another Server address. Type the Server Name
or IP address. (The typed Server Name or IP
address will be shown in the [Address] list.
[Delete] ...........................Delete the selected WTS from the [Address] list.
[Default
List] ...................Revert the state of the [Address] list to the saved one.
[Address] ........................The added WTS IP address appears.
Click the drop-down list box below [Address]. Select the appropriate WTS
protocol from the list.
[TCP browser] ................Citrix MetaFrame uses UDP protocol to search for the
WTS. Select this when using a UDP protocol.
[TCP + HTTP browser]...Select this when not using a UDP because of the
firewall in your network environment.
[SSL + HTTPS browser]
...................................This is not available with eClient.
Click [OK] to return to the previous page and save the adjustments.