Eizo 531L - Manual (Page 81)

English
6. USING THE TERMINAL PROPERTIES
81
Security Settings
This enables settings on network information of the WTS invisible to prevent from
undesirable change. When the security is active, the following settings become.
• “Terminal Connection Manager”
* [Configure] tab
• “Terminal Properties”
* [General] tab... [Reset the terminal to factory - default settings]
*
[Network] tab
* [Printers] tab
* [PPP] tab
* [ICA] tab
* [System] tab... [Update...], [Security]
PROCEDURE
1.
Click the [Security Enable] box.
2.
Click [Setting Password...].
3.
“Security Password” dialog box is displayed.
[Password] ..........................Enter the password.
[Confirm password:]...........Enter the same password for confirmation
Click [Ok] to return to the “Terminal Properties” dialog box.
Click [OK] to save the settings and close the “Terminal Properties” dialog box.