Take inventory – Nortel Networks 553-3901-200 User Manual
Page 11
Advertising
Preinstallation preparation
Page 11 of 46
ISDN Basic Rate Interface
Installation
•
Keep the circuit cards in their antistatic bags until you are ready to install
them.
•
Do not stack the plug-in cards on top of each other. This can damage the
components and the printed circuits on the cards.
Take inventory
After unpacking, verify that all the equipment necessary is at the site before
installation begins. Check the equipment received against the shipping
documents. Note any shortages and report them to your sales representative.
Advertising