Nortel Networks 553-3901-200 - Manual (Page 14)

Page 14 of 46 Install ISDN BRI hardware
553-3901-200 Standard 7.00 January 2002
• ISDN PRI: Installation (553-2901-201)
• System Installation Procedures (553-3001-210)
• ISDN Basic Rate Interface: Product Description (553-3901-100)
• ISDN Basic Rate Interface: Administration (553-3901-300)
Install ISDN BRI hardware for line applications
The following lists the procedures for installing ISDN BRI hardware for line
applications. Meridian 1 must already be installed and operating according to
the instructions in System Installation Procedures (553-3001-210) before
performing these procedures.
For a successful installation, perform these procedures in the order listed
below:
1 Select the card slots where the ISDN BRI cards will be located
2 Remove the module cover for card installation
3 Install the MISPs
4 Install the SILCs and/or UILCs or BRSCs
5 Connect ISDN BRI terminals. This procedure comprises the following:
— connect the Meridian 1 to the Main Distribution Frame (MDF)
— cross connect the MDF
— connect ISDN BRI terminals to the DSL
— initialize the ISDN BRI terminals.
—————————— End of Procedure ——————————