National Instruments Xmath Interactive Control Design Module ICDM - Manual (Page 78)

Chapter 9 History Window
Xmath Interactive Control Design Module 9-2 ni.com
• A Variable-Edit box which shows which history list entry is active or
currently selected. The selected entry is the controller exported to
ICDM for plotting.
• Buttons for manipulating the history list.
Selecting the Active Controller
You can type a number in the Variable-Edit box that shows the selected
controller, or you can select a controller in the list (which will become
highlighted) and then click Select at the bottom of the History
window.
Notice that you can consider the History window as a type of synthesis
window, with one simple design parameter: the integer that gives the
selected design.
Figure 9-1. History Window
Editing the Comments
To change the comment stored with a design, select an entry from the list
and click Edit.