NETGEAR PS100 - Manual (Page 102)

NetGear Print Server Manual
93
a. Select "Netgear Print Server Administration" from the NETGEAR Print Server for Print Server
icon on your desktop.
b. Select Print Server from the Active Print Server list.
c. Select NetWare PSERVER.
d. Select the Advanced icon.
e. Select NetWare PSERVER.
f. Click on Print Server Mode.
g. Select the NDS Tree Name (refer to step 1 on page 4-20).
h. Enter the Context Name (refer to step 1 on page 4-20).
i. Click on Save to Device.
7-4 Using Advanced Functions
The print server is capable of servicing multiple queues from multiple file servers at one time. The
print server also supports a function called logical printer that allows manipulation of print data before
sending it to the printer. One typical use of the logical printer function is the conversion of line feed
into carriage return and line feed for proper printing on to a line printer.
Servicing Multiple NetWare Bindery File Servers
If your print server is configured as a NetWare Print Server and you want it to service more than one
Bindery file server:
1. Log in, with supervisory rights, to each file server you want your print server to service.
2. Execute PCONSOLE from the System volume of each file server.
3. Create queues and provide the predetermined print server name for your Model PS110/PS113 print
server on each Bindery file server you want the print server to service.
These steps are outlined in “Setting PSERVER Mode in NetWare 3.x (Bindery Mode)”.
4. Log in, with SUPERVISORY access privileges, to the file server you want to designate as the master
file server for your print server.
5. Execute the PCONSOLE program.
6. Create queues and provide the print server name to the master file server.
This procedure is the same as setting up the other Bindery file servers.
7. Select Print Server Information from the Available Options main menu.