Subnet addressing – NETGEAR PS100 User Manual

Page 130

Advertising
background image

NetGear Print Server Manual

121

Subnet Addressing

By looking at the addressing structures, you can see that even with a Class C address there are a large

number of hosts per network. Such a structure is an inefficient use of addresses if each end of a routed

link requires a different network number. It is unlikely that the smaller office LANs would have that

many devices. You can resolve this problem by using a technique known as subnet addressing.

Subnet addressing allows us to split one IP network address into smaller multiple physical networks

known as subnetworks. Some of the node numbers are used as a subnet number instead. A Class B

address gives us 16 bits of node numbers translating to 64,000 nodes. Most organizations do not use

64,000 nodes, so there are free bits that can be reassigned. Subnet addressing makes use of those bits

that are free, as illustrated below.

Example of Subnetting a Class B Address

A Class B address can be effectively translated into multiple Class C addresses. For example, the IP

address of 172.16.0.0 is assigned, but node addresses are limited to 255 maximum, allowing 8 extra

bits to use as a subnet address. The IP address of 172.16.97.235 would be interpreted as IP network

address 172.16, subnet number 97, and node number 235. In addition to extending the number of

addresses available, subnet addressing provides other benefits. Subnet addressing allows a network

manager to construct an address scheme for the network by using different subnets for other

geographical locations in the network or for other departments in the organization.

Although the preceding example uses the entire third octet for a subnet address, note that you are not

restricted to octet boundaries in subnetting. To create more network numbers, you need only shift some

bits from the host address to the network address. For instance, to partition a Class C network number

(192.68.135.0) into two, you shift 1 bit from the host address to the network address. The new netmask

(or subnet mask) is 255.255.255.128. The first subnet has network number 192.68.135.0 with hosts

192.68.135.1 to 129.68.135.126, and the second subnet has network number 192.68.135.128 with hosts

192.68.135.129 to 192.68.135.254.

The number 192.68.135.127 is not assigned because it is the broadcast address of the

first subnet. And 192.68.135.128 is not assigned because it is the network address of

the second subnet.

The table below lists the additional subnet mask bits in dotted-decimal notation. To use the table, write

down the original class netmask and replace the 0 value octets with the dotted-decimal value of the

additional subnet bits. For instance, to partition your Class C network 204.247.203.0 with subnet mask

255.255.255.0 into 16 subnets (4 bits), the new subnet mask becomes 255.255.255.240.

Netmask Notation Translation Table for One Octet

Number of Bits

Dotted-Decimal Value

1

128

2

192

3

224

4

240

5

248

Advertising