NETGEAR PS100 - Manual (Page 89)

NetGear Print Server Manual
80
Setting RPRINTER Mode in NetWare 3.x (Bindery Mode)
To set up the NetWare file server to connect to the Model PS104/PS105/PS110/PS113 print server in
the NetWare RPRINTER mode, first designate a NetWare file server that your print server will log on
to retrieve print jobs. Log on to the file server as SUPERVISOR or as a user with SUPERVISOR
privileges. The print server can be configured to service multiple NetWare Bindery file servers as
described in below “Using Advanced Functions”. However, one of the NetWare file servers has to be
designated as the master file server, and this file server is the one that must be configured and logged
on to.
To set up the NetWare file server:
1. Execute the PCONSOLE program from the system volume of the file server.
2. Create queues.
To create queues:
a. Select Print Queue Information in the Available Options window.
b. Press [Ins] to add a new queue.
c. Type in a queue name and press [Enter].
d. Repeat steps b and c until you have the number of queues you want.
e. Press [Esc] to return to the PCONSOLE Main Menu.
3. Add the print server.
To inform the NetWare file server that a print server exists:
a. Select Print Server Information from the PCONSOLE Main Menu.
b. Press [Ins] to add a new print server.
c. Type the print server name.
This name is not the name of the print server. It is the print server that you will set up
on the NetWare file server. At the end of the installation process, you will load PSERVER.NLM on the
file server using this name.
4. Assign printers.
This step should be done every time you add a new print server or when you connect a new printer to the
print server.
To associate a NetWare printer object with each printer port of the print server:
a. Select the print server you added in step 3.
b. Select Print Server Configuration.