NETGEAR PS100 - Manual (Page 137)

NetGear Print Server Manual
128
Click on Next to view the Configure Port Handler Screen.
In the Host Address IP field, enter the IP address previously assigned to the Print Server device, as
illustrated below.
Configure Port Handler
Configure Port Handler Window
In the Printer Name field, enter the Logical Port name on the Print Server (for example, L1).
• For print servers with one parallel port, the logical ports are named L1, L2, and L3. For devices with two or
three parallel ports, the logical ports are named L1 to L8.
Click Finish; then select appropriate drivers for Windows 95, Windows 98,
Windows NT 4, and Windows 2000.
The new printer agent will now appear in the Printer Agent List window.
Workstation Configuration
Before installation and configuration of the Public Access Printers on your workstation, ensure that the
following statements apply:
Novell IntranetWare Client v2.2 (or later) is installed on your PC.
You have access to the Novell Printer Manager utility (Nwpmw32.exe).
Installing and Configuring the Public Access Printers
To install and configure public access printers:
Start the Novell Printer Manager utility.
Select Printer>New from the menu, and click on Add.
Select the required printer and click on Install.
Click on Close.