Nortel Networks Nortel 4070 - Manual (Page 112)

Messaging
112
Accessing the Message settings menu
To access the Message settings menu, perform the following steps:
Configuring the Overwrite option
Use the Overwrite option to control what happens when the handset
receives a new message, but there is no room to store more messages.
If the Overwrite option is enabled, and there is no room to store a newly
arrived message, the oldest message stored on the phone is overwritten.
If the Overwrite option is disabled, and there is no room to store a newly
arrived message, the new message is rejected.
To configure the overwrite option, perform the following steps:
1. Press the Menu soft key to access the Main menu.
2. Press the Up or Down key to highlight the
Messaging icon and press the Select soft key.
3. Press the Left or Right key to choose the
Message settings menu section.
1. Open the Message Settings menu as shown in
“Accessing the Message settings menu”
(page 112)
.
2. Press the Up or Down key to highlight the
Overwrite old option.
Menu
Select
Overwrite old