Nortel Networks Nortel 4070 - Manual (Page 183)

Accessing additional features using FFC or SPRE codes
183
Accessing additional features
using FFC or SPRE codes
Use Flexible Feature Codes (FFC) and Special Prefix (SPRE) codes to
access additional features. Contact your system administrator to check if
these features are available for your use. You can use the two types of
codes as follows:
• FFC codes—dial an FFC to access some of your handset features.
To use an FFC, enter the FFC and press the
Call key.
• SPRE codes—dial a SPRE code plus a one- or two-digit number to
access some of your handset features. The SPRE codes are unique
to your system; however, the digits that follow the SPRE are fixed.
For example, dial SPRE + 74 to forward all your calls to another
number.
To access additional features using FFC or SPRE codes:
Use the following table to list the FFC or SPRE codes assigned by your
system administrator.
Attention: FFC and SPRE codes are not applicable to SIP DECT
system.
1. Use the Dialpad to enter the FFC or SPRE code
while the handset is idle.
2. Press the Call key.
Attention: Contact your system administrator for the specific FFC and
SPRE code numbers.
R