Nortel Networks Nortel 4070 - Manual (Page 186)

Handset accessories
186
Installing the belt clip
You can use the belt clip to fasten the handset on a belt (swivel belt clip),
shirt or coat pocket (executive clip).
To install the belt clip, perform the following steps:
1. Place the handset facedown on a flat surface.
2. Use the plastic tool to unlock the fastening of the belt clip
compartment cover as shown in
Figure 17 .
The plastic tool is shipped in the box with the handset.
3. Slide out the belt clip compartment cover.
4. Remove the plastic tool.
5. Install the swivel belt clip as shown in Figure 18 or the executive clip
as shown in Figure 19 .
Bluetooth
Module Bluetooth module for the DECT 4070
Handset. N0162966
Item Description
Order
code