Installing the headset – Nortel Networks Nortel 4070 User Manual
Page 189
Advertising
Handset accessories
189
To uninstall the belt clip, perform the following steps:
1.
Place the handset facedown on a flat surface.
2.
Use the plastic tool to unlock the belt clip fastening.
The plastic tool is shipped in the box with the handset.
3.
Slide out the belt clip.
4.
Remove the plastic tool.
5.
Install the belt clip compartment cover as shown in
Figure 20: Belt clip compartment cover
Installing the headset
To use the optional headset with your DECT 4027 and 4070 Handsets,
install it as shown in the following figure.
Belt clip
compartment
cover
Handset
Advertising
This manual is related to the following products: