Nortel Networks Nortel 4070 - Manual (Page 168)

Telephone settings
168
Call settings
You can change the call settings for your handset.
Use the Calls settings menu to assign the preferences using the following
options:
• “Accessing the Calls settings menu” (page 169)
• “Accessing Statistics information” (page 169)
• “Answer mode configuration” (page 170)
• “Caller filter configuration” (page 172)
• “Configuring emergency calls” (page 178)
• “Assigning the Silent charging feature” (page 180)
3. Use the Dialpad to enter the time period:
• the first value (from 1 to 59 seconds) defines the
time before the display becomes dim.
• the second value (from 1 to 59 seconds) defines
the time before the display switches off (after the
display becomes dim). If you configure the second
value as 0, the display never switches off and the
handset battery discharges faster.
Attention: During a call, the display switches off to
prevent a rapid battery discharge. Press the
OK
key to highlight the display.
4. Press the Save soft key.
5. Press the Clr key one or more times to return to the
idle display.
Save