Nortel Networks Nortel 4070 - Manual (Page 88)

Contacts
88
Adding a contact number
To add a contact number, perform the following steps:
6. Press the Clr key one or more times to return to the
idle display.
1. Open the Contacts menu as shown in “Accessing
the Contacts menu” (page 87) .
2. Press the Up or Down key to choose the contact to
edit and press the More soft key.
3. Press the Up or Down key to highlight the Edit
contact option and press the Select soft key.
4. Press the Up or Down key to highlight the New
number option and press the Add soft key to add a
new number for this contact.
5. Press the Up or Down key to highlight the required
number type and press the OK soft key.
6. Use the Dialpad to enter the phone number and
press the Save soft key.
7. Press the Save soft key, and then press the Yes
soft key to confirm the changes.
More
Edit contact
Select
New number
Add
OK
Save
Save
Yes