Nortel Networks Nortel 4070 - Manual (Page 51)

Call features
51
Using Predial mode
To predial a number, perform the following steps:
To edit a number in Predial mode, perform the following steps:
1. Use the Dialpad to enter the phone number.
2. Press the Call key.
You can add additional digits to the number you
dial. For example, in some offices you must add a
digit at the beginning of the number to place a call
to an outside line.
1. Use the Right or Left key to position the insertion
point.
2. Use the Dialpad to enter the new digits.
Press the Clr key to delete individual digits or to
cancel predial.
Long press the * key to insert a comma to indicate
a pause when you enter a number.
3. Press the Call key.
4. Press the Clr key to return to the idle display.
Attention: When you predial a number, if the input cursor is positioned
after the telephone number, the new digits are inserted at
the end of that telephone number. If the input cursor is
positioned at any other point, the new digits are inserted in
front of the insertion point.
R
R