National Instruments Data Acquisition Device NI USB-621x - Manual (Page 12)

© National Instruments Corporation xiii NI USB-621x User Manual
About This Manual
The NI USB-621x User Manual contains information about using the
National Instruments USB-621x data acquisition (DAQ) devices with
NI-DAQmx 8.7.1 and later. NI USB-6210, USB-6211, USB-6212,
USB-6215, USB-6216, and USB-6218 devices feature up to 32 analog
input (AI) channels, up to two analog output (AO) channels, two counters,
and up to eight lines of digital input (DI) and up to eight lines of digital
output (DO), or 32 bidirectional static DIO lines.
Conventions
The following conventions are used in this manual:
<> Angle brackets that contain numbers separated by an ellipsis represent
a range of values associated with a bit or signal name—for example,
AO <3..0>.
» The » symbol leads you through nested menu items and dialog box options
to a final action. The sequence File»Page Setup»Options directs you to
pull down the File menu, select the Page Setup item, and select Options
from the last dialog box.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash.
When this symbol is marked on a
product, refer to the Read Me First: Safety and Radio-Frequency
Interference for information about precautions to take.
bold Bold text denotes items that you must select or click in the software, such
as menu items and dialog box options. Bold text also denotes parameter
names.
italic Italic text denotes variables, emphasis, a cross-reference, or an introduction
to a key concept. Italic text also denotes text that is a placeholder for a word
or value that you must supply.
monospace Text in this font denotes text or characters that you should enter from the
keyboard, sections of code, programming examples, and syntax examples.
This font is also used for the proper names of disk drives, paths, directories,
programs, subprograms, subroutines, device names, functions, operations,
variables, filenames, and extensions.