Nortel Networks Nortel Secure Router 4134 - Manual (Page 19)

Logging in to the Secure Router 4134 19
Figure 5
Accessing the bootrom command menu
If you accidentally enter the bootrom command menu, you can exit that
command menu and restart the normal boot sequence by pressing @ on
your keyboard.
For detailed information on using the bootrom command menu, see Nortel
Secure Router 4134 — Troubleshooting (NN47263-700).
Logging in to the Secure Router 4134
The first time you log on to the Secure Router 4134 CLI, you perform initial
configuration such as the following:
• Configure the IP address for the management port.
• Configure the next-hop (gateway IP address).
• Enable remote access.
Use the procedure in this section to log on to the Secure Router 4134 for
the first time.
Nortel Secure Router 4134
Commissioning
NN47263-302 01.02 Standard
10.0 2 August 2007
Copyright © 2007, Nortel Networks
.