NetComm V85 - Manual (Page 17)

V85 Desktop VoIP Phone User Guide 17
YML772 Rev1
Summary of Key Functions and Displays
Key Description
Light The red light blinks on-off when there is an incoming
call.
LCD Display Displays menu and status indicators.
◄ UP Key When navigating the IP Phone’s Main Menu, this key
is used to scroll up through menu items.
When editing menu items, this key functions as
“delete” key and deletes a character for each key
press.
When the IP Phone is in Dial Mode, the “◄ UP” key
functions as “delete” key for entered digits.
► DOWN Key When navigating the IP Phone’s Main Menu, this key
is used to scroll down through menu items.
When editing menu item, this key is used as “right
shift” to shift the cursor right one digit per each key
press.
- IN VOL+ When the IP phone is idle or in use via handset or
speaker, this key increases/decreases voice volume.
The volume of speaker, handset and ring are adjusted
separately according to which mode the phone is in.
When in idle, “+” key increase the volume of ring
tone, “-” key decreases the volume of ring tone; in
hands-free mode, “+” key increases the volume of
speaker, “-” key decreases the volume of speaker;
and when in handset mode, “+” key increases the
volume of the handset, “-” key decreases the volume
of handset.
+OUT VOL Adjusts the volume at which sound is sent out to
remote party.
SPEAKER This key is pressed to switch between handset and
speaker.
HOLD Used to put the conversation on hold.
This key can also be pressed to facilitate transfer of
an active call to another IP phone. When the IP phone
is active (i.e. incoming call answered or outgoing call
accepted), by pressing this key, a dial tone will be
heard, then another IP phone number entered to call
and speak to another party; then transfer the call by
pressing “TRANSFER” key.