NetComm V85 - Manual (Page 35)

V85 Desktop VoIP Phone User Guide 35
YML772 Rev1
Call Hold
During a call pressing HOLD once will invoke the V85 “consultant transfer” state; a dial tone will
be heard. In this state call transfer can be initiated.
Press HOLD again to enter the V85 “Hold” state; a “call hold tone” will be heard.
To retrieve a on-hold call, press HOLD again and both ends will be able to continue the
conversation.
Phone Book and Speed Dial
Phone Book
Pressing the Phone Book button at the right bottom corner retrieves the Phone Book where
up to 50 phone numbers can be stored. When the Phone Book button is pressed, the two
options shown in the LCD display are Phone Book and Speed Dial.
If you select the Phone Book option, you will see List, Add, Edit, Delete, and Delete All. To
add names and numbers, select Add. To edit or delete phone book information, select edit or
delete. All information in the phone book may be deleted by selecting Delete All.
Speed Dial
Speed-dial entry can be added by the following Phone Book ► Speed Dial operation. The
V85 will display M1- M10 in the LCD screen. Speed Dial entries can be added or edited
from this point. The menu provides two options for each speed dial entry: “Current Info”
and “Del Setting”.
If “Current Info” displays “empty”, simply press “MENU/OK” to select a phone number
from your existing Phone Book entries. “Del Setting” is used to delete the Speed Dial entry
from the slot.
Once the speed dial items M1-M10 are set, you can speed dial a call by directly pressing the
M1-M10 keys when the phone is off-hooked.