NetComm V85 - Manual (Page 26)

26 V85 Desktop VoIP Phone User Guide
YML772 Rev1
V85 Network Menu
Click on the “Network” icon on left to display network settings.
Figure 5-3
Basic
Under the Basic heading, you are able to verify or update the Network mode in which the
V85 is operating. These are: Dynamic IP (Default) which is the configuration used in most
typical environments; PPPoE which enables the V85 to establish a direct link with an ISP or
VoIP service provider; and Static IP with the corresponding fields setting the parameters to
operate in this mode.
Others
MAC Address: View the MAC Address of the IP Phone; a read-only
field.
NTP Server: Set the NTP (Network Time Protocol) server’s IP
Address for the IP Phone to get current date/time and
display it on the LCD screen.
Time Zone: Specify the time zone of your area; you could click
the nearby “View” icon to see the time zone of your
area. E.g. set the value to 10 for Australia.