Network Technologies USBV-x - Manual (Page 24)

NTI UNIMUX SERIES USB KVM SWITCH
20
Note: The scan dwell time set by the user only effects that user and has no effect on other switch users.
Normal Mode
When the UNIMUX is not in Command, Broadcast, or Scan mode and all of the UNIMUX mode LEDs are OFF, the user is in
Normal Mode, controlling the CPU to which the user is connected through the USB KVM switch.
Edit Mode
Note: Edit Mode will only be accessible if the administrator is logged in.
To activate Edit Mode press <
Ctrl > + < E > from the Command Mode menu.
Edit Mode enables the administrator to modify the names of the CPUs connected to the switch. Names of CPUs can be up to 12
characters in length. Use the <
Shift > key to introduce capital letters (the < Capslock > does not work in OSD).
Function: Keystroke:
Move cursor one position
to the right
Move cursor one position
to the left
Move cursor to the
previous port
Move cursor to the
next port
Selects the first port on
the switch
Figure 19- Edit Mode screen
Selects the last port on
the switch
Toggles between insert
and overstrike
Erase current character
Erase previous character
When finished making changes in Edit Mode, press < Enter > and a prompt will appear to press either < Y > to save the changes or
< N > to continue making changes without saving the changes just made. If the < Esc > key is pressed instead of < Enter >, all
changes made will be ignored and the display will return to the previous menu.
Home
End
Insert (The character either gets inserted and the remainder of the name
gets shifted to the right, OR the current character gets overwritten.)
Delete
Backspace