Network Technologies USBV-x - Manual (Page 27)

NTI UNIMUX SERIES USB KVM SWITCH
23
A checklist with all the ports numbers preceded by a check box will be displayed in the window.
•
unchecked box = the corresponding port is set as
connected to a non-MAC CPU
•
checked box = the corresponding port is set as
connected to a MAC CPU
In order to change the status of a port, the administrator has to first
select the port. The selected port is highlighted with a green bar.
To select another port, the administrator can use the arrow keys or
mouse movement. The name of the selected port is displayed at the
bottom left of the menu.
The administrator can toggle the state of the selected check box by
pressing the <Spacebar> or clicking the left mouse button.
•
Press < S > to check all the ports
•
Press < C > to uncheck all the ports
Figure 24- Configure Ports for MAC screen
When <
Esc > is pressed, the display will return to the Change Settings menu. The list is automatically saved.
The settings apply to all users of the switch.
Search Mode
To enter Search Mode, type any alphabetical or numeric character
when the Command Mode menu is on the monitor.
Search Mode enables the user to enter and maneuver through a
list of CPU names. The CPU name best matching the characters
typed is selected. The list of CPUs may also be searched for a
specific (or similar) name. The following commands are valid when
the search option has been invoked from Command Mode.
Function:
Keystroke:
Erase previous character
in search name
Figure 25- Search Mode screen
Add a character to the search
string and select the best
matching CPU name
Exit Search Mode, return to
Command Mode
Switch to selected port
Backspace
A-Z
0-9
(Type any alphabetical or numeric character)
Esc
Enter