Network Technologies USBV-x - Manual (Page 39)

NTI UNIMUX SERIES USB KVM SWITCH
35
Figure 36- Master to slave cable connections- multi-user switches
Limitations
¾ Up to 8 slaves may be connected to form a maximum system size of 152 ports (1x32 port master + 8x16 port slaves).
¾ Slaves must be added to the master in order (slave #1 to master’s port 1, slave #2 to master’s port 2, etc).
FYI: Master Port 1 (with an 8-port Slave connected to it) will become ports 1-8 (1-4 for a 4-port slave). Master Unit Port 2
(with a second 8-port Slave Unit connected) will become port numbers 9-16 (5-8 for a 4-port slave).
¾ The front panel buttons are only used to operate standalone switches. To control a cascaded network of switches, only the
OSD commands within Command Mode will be recognized.
Note: Cascading is not an option in the UNIMUX-USBV-2 2 port USB KVM switch.
MONITOR 1
MONITOR 2
MONITOR 3
MONITOR 4
USER 1 USER 2 USER 3 USER 4
R
S
2
3
2
NTI
R
CPU 16
MONITOR 1
MONITOR 2
MONITOR 3
MONITOR 4
USER 1 USER 2 USER 3 USER 4
R
S
2
3
2
NTI
R
CPU 16
SLAVE #2 UNIMUX 4X16 SLAVE #1 UNIMUX 4X16
USBVEXT- xx -MM
USBVEXT- xx -MM
CONNECT MASTER CPU PORT 1
TO ONE USER PORT ON SLAVE1
CONNECT MASTER CPU PORT 2
ONE USER PORT ON SLAVE2
MONITOR
USB DEVICES
CPU 4 CPU 3 CPU 2 CPU 1
CPU 8 CPU 7 CPU 6 CPU 5
8 4 7 3 6 2 5 1 VIDEO VIDEO
R
S
2
3
2
NETWORK TECHNOLOGIES INC Tel:330-562-7070 1275 Danner Dr, Aurora, OH 44202 www.nti1.com
REAR VIEW OF MASTER (UNIMUX-USBV-8O-RS)