Cabling, Cabling -5, Figure 2-2 – National Instruments 8330 Series User Manual
Page 16: Pxi mxi-3 before installation as secondary -5
© National Instruments Corporation
Figure 2-2 shows a PXI MXI-3 card just before installation in the system
controller slot of a National Instruments PXI-1000 mainframe.
Figure 2-2. PXI MXI-3 Before Installation as Secondary
Connect the appropriate serial cable to both primary and secondary
MXI-3 cards. If you are using a fiber-optic cable, be sure to remove the
protective caps from the connectors.
Do not remove the cable after the system is powered on. Doing so may crash
Turn on the system containing your secondary MXI-3 card.
Turn on the system containing your primary MXI-3 card.
For more information on cables, see the
in Down Position
PXI/CompactPCI Slot 1