System requirements – NetComm NP642 User Manual
Page 7
NP642 IEEE 802.11g PCI Adapter
7
YML785 Rev1
System Requirements
• Desktop computer with available 32bit PCI slot.
• Windows 98SE, ME, 2000, XP
• 32Mb of memory and a 300MHz processor
• 20Mb spare disk storage
• CD-ROM Drive
Caution
The NetComm NP642 must be installed and operated in accordance with
the instructions provided in this Quick Start Guide. Damage caused by
incorrect or careless installation is not covered by warranty.
Static Electricity
Computers are very sensitive to static electricity which may be discharged
by the user when the internal circuitry is touched. Ensure that you have
discharged any static prior to touching the computer’s PCI slots and
to removing the NetComm NP642 from its static bag, by touching an
earthed object first. This can be the computer’s Power Supply provided
the power is switched off at the wall, but the power cord is connected to
the power socket; static will be discharged through the power cord’s earth
connection.