Roland KR-115 - Manual (Page 137)

137
Chapter 8 Creating and Editing Songs
Chapter 8
fig.d-16tr.eps_50
■ Modifying the Settings of Each Part
You can change the Tones and volume, as well as mute the
playback, for each individual part in songs recorded with the
16-track Sequencer and the internal songs.
→ Because commercially available Roland SMF music files are
also made up of 16 Parts, you can change the settings for the
individual Parts and play them back in the same way.
First, select the song for which the settings are to be made
(p. 75).
1. Display the 16-track Sequencer screen (p. 136).
2. Touch the screen to choose the Part for which you want
to make settings.
Change the settings for the selected Part.
* When you touch <Clear>, a message asking you to confirm the
deletion appears. To erase the recorded sound, touch <OK>. If
you don’t want to erase the recorded sound, touch <Cancel>.
Once a performance has been erased, it can’t be restored.
* You cannot touch <Clear> during playback of the song.
3.
Touch <Part> to make more detailed settings for the
selected part.
A screen like the one shown below appears.
fig.d-16trpart.eps_50
You can change the Tone for the selected Part by
pressing a Tone button while this screen is displayed.
When selecting Part 10 or 11, you can touch <Drum Set>
to select the drum set or effect sound.
The Part name and tone name are displayed at the top of
the screen.
4. Touch for the corresponding item to change
the setting.
You can adjust the values by touching the desired
parameter and turning the dial or by touching and
dragging the slider.
Icon Explanation
<1>–<16>
Touch to select the part to be recorded, or the
part whose settings are to be changed. The
button for the selected part changes color.
This Part to be played back
This part is selected
(Movement)
The Part not to be played back (Muted Part)
Parts that do not have performance data
recorded to them.
Solo Only the selected Part is played back.
Mute
This allows you to prevent the sound for the
selected part from playing.
Clear
The performance data for the selected part is
deleted.
Part
This displays the Part Settings screen, in which
you can make detailed settings for each part.
For details refer to p. 137.
Tone Set
The Tone Set screen appears. For details refer
to p. 138.
Display Function
Solo Only the selected Part is played back.
Mute
Toggles playback of the selected Part to on
or off.
Clear
The performance data for the selected part is
deleted.
Display Explanation
Volume Changes the volume level.
Reverb
Changes the amount of reverb effect
applied to the sound.
Chorus Changes the amount of chorus applied.
Panpot
Shifts the direction from which the sound is
heard between left and right.
Touch to shift the sound to the right,
or touch to shift it to the left.
KR117_115_r_e.book 137 ページ ２００６年２月２７日 月曜日 午前１１時５５分