Roland KR-115 - Manual (Page 174)

174
Chapter 10 Various Settings
Chapter 10
■ Changing the Infrared
Transmission Function Settings
Some digital devices equipped with an IrDA (infrared) port
are able to transfer song data in SMF format to the KR. For
more detailed information, refer to the owner's manual for
the digital device.
Note:
Users are responsible for learning how to use infrared
transmissions. The KR is not necessarily compatible with all
devices equipped with an IrDA port. Roland cannot answer
questions regarding infrared transmissions.
Selecting functions Infrared Transmissions or
Serial Port
You cannot simultaneously use the remote sensor and
infrared receive with the KR.
You can choose to use either one, or to switch both of them
off.
At step 3 in “Procedure” (p. 165), touch <Ir/Serial Port>.
A screen like the one shown below appears.
Models Featuring CD Drive
Touch <Ir/Serial> .
Models Without Moving Key
Touch <ON/OFF> .
Setting Playback After the Song is Transferred
(Infrared Playback)
This sets the KR to play back a song automatically following
transfer of the song from the digital device.
You can also set this so that songs are not played back
automatically after the song is transferred.
Touch <Ir Play> .
Display Explanation
Off Neither is used.
Ir The infrared receriver is used.
Serial Port
The device connected to the serial port is
used.
Display Explanation
Off Not used.
On The infrared receriver is used.
Display Explanation
Standby
Following transfer of the song, the song is
ready to play but not played back.
Auto
The song is played back automatically
after the song is transferred.
KR117_115_r_e.book 174 ページ ２００６年２月２７日 月曜日 午前１１時５５分