Roland KR-115 - Manual (Page 165)

165
Chapter 10 Various Settings
Chapter10
Other Settings
You can change the tuning, the language shown on the
display, and other settings to make the KR easier to use.
■ Procedure
1. Switch to the Basic screen, or press the One Touch
Program [Piano] button.
2. Press the [Option] button.
A “Functions screen” like the following appears.
fig.d-funcmenu2.eps_50
When you press the [Option] button on the Basic screen,
the first page displayed shows the parameters for the
Automatic Accompaniment settings (p. 161).
Repeat
When “Repeat” is turned ON
on the Marker screen (p. 101)
this specified whether the
count-in will sound each time
the range between the
markers is repeated, or only
the first time.
First Time, Each Time
Parameter Name Value
Parameter Explanation
Tuning Changing the tuning methods.
Pedal
Setting Assigns functions to the pedal and
performance pad (p. 167).
Master Tune Sets the KR’s standard pitch (p. 170).
External Display
Selects the content to be shown on the
connected external display (p. 186).
Language
Selects the language used in the
display (p. 170).
User Image
Display Selects the image data and display
used (p. 170).
Opening
Message Sets the message that appears when the
power is turned on (p. 171).
MIDI Setting Refer to p. 189.
Program Change Refer to p. 189.
Memory Backup
Stores edited settings and other data to
the KR (p. 171).
MIDI Ensemble Refer to p. 189.
Factory Reset
Restores the content stored with
Memory Backup to the original factory
settings (p. 172).
V-LINK Refer to p. 187.
USB Driver Refer to p. 196.
Remote Control
Changing the functions of the remote
control’s buttons (p. 172).
KR117_115_r_e.book 165 ページ ２００６年２月２７日 月曜日 午前１１時５５分