Roland KR-115 - Manual (Page 41)

41
Chapter 1 Performance
Chapter 1
■ Selecting the tone to which the effect is applied
1.
Press the [Surround/Reverb] button and watch the indicator light up.
2.
Touch <Surround> to display the Surround screen.
3.
Press the [Option] button.
4.
Touch to display the following screens.
fig.d-adv3dopt.eps_60
5.
Touch the icon to select the value.
6.
When you press the [Exit] button, you return to the Surround screen.
Parameter Display Explanation
Part
All Parts
The effect is applied to all tones played with the
keyboard (the lower tone, upper tone, and layer
tone).
Layer Part
The effect is applied only to the layer part.
When not using a layer performance (p. 31), the
Advanced 3D effect is not applied to the keyboard
performance, even if <Keyboard> on the Surround
Option screen is set to On.
KR117_115_r_e.book 41 ページ ２００６年２月２７日 月曜日 午前１１時５５分