Roland KR-115 - Manual (Page 191)

191
Chapter 11 Connecting External Devices
Chapter11
■ Sending Tone Change Messages
(Program Change/Bank Select
MSB/Bank Select LSB)
A Program Change is a message that means “change to the
Tone of the specified number.” The device that receives this
changes to the Tone of the corresponding number.
When you choose a Program Change message (Program
Number), the Program Number will be transmitted to the
MIDI device connected to the KR. The MIDI device that
receives the Program Number changes the tone to the
corresponding Program Number.
Normally, the Tone is selected from the 128 Tones available.
Some MIDI devices, however, have more than 128 Tones.
With such devices, the Tone is selected through a
combination of Program Change messages and Bank Select
messages. There are two parts of a Bank Select message: the
MSB (Controller 0, with a value of 0–127) and the LSB
(Controller 32, with a value of 0–127).
* Some MIDI instruments can’t handle Bank Select messages.
Others can handle Bank Selects, but do not recognize the LSB
part.
Sending Recorded
Performance Data to a MIDI
Device (Composer MIDI Out)
When Composer Out is active, you can send performance
data recorded with the KR to a connected MIDI device or
computer.
When you turn on the power, this is set to “OFF” (data is not
sent).
1.
Press the [Menu] button.
2.
Touch <Composer MIDI Out>.
fig.09-04.eps
3. Touch to set ON or OFF.
4.
Press the [Exit] button to return to The “Composer
Menu” screen.
Connecting to Audio Equipment
You can connect audio devices to play the sound of the KR
through the speakers of your audio system, or to record your
performance on a recording device.
■ Connectors
fig.09-
KR’s Jack Panel
Front
Rear
KR117_115_r_e.book 191 ページ ２００６年２月２７日 月曜日 午前１１時５５分