Applying effects to the sound (effects) – Roland KR-115 User Manual
Page 46
46
Chapter 1 Performance
Chapter 1
Applying Effects to the Sound (Effects)
You can apply a wide range of different effects to the notes you play on the
keyboard.
1.
First, press the Tone button to select a Tone (p. 28).
The “Tone selection screen” appears.
2.
Then, touch <Effects>.
The “Effects screen” appears.
fig.d-effects.eps_60
Applying Effects to the Sound
3.
Touch <ON>.
The effect selected with <Type> will be applied.
Selecting the Type of Effect
4.
Touch <Type>
to select the type of effect.
Setting the Effect
The parameters that can be set change according to the type selected in Step 4.
5.
Touch
for the parameter being set to select the value.
You can also move the slider with the dial.
Press the [Exit] button to return to the Tone selection screen.
Cancelling the Effect
6.
On the Effects screen, touch <OFF>.
For more on the effect types,
refer to the “Effects List” (p.
NOTE
You may find effects not being
applied to certain parts when
different effects are applied to
the upper tone, layer tone, and
lower tone. In such instances,
you can select which effect is
KR117_115_r_e.book 46 ページ ２００６年２月２７日 月曜日 午前１１時５５分