Roland KR-115 - Manual (Page 181)

181
Chapter 10 Various Settings
Chapter10
Adjusting the Piano Designer
Resonance
You can made precise changes to the Piano Designer
“Resonance” setting.
More of the resonance effect is applied as the value is
increased.
1. Press the [Piano Designer] button.
2.
Press the [Option] button.
A screen like the one shown below appears.
fig.d-touchpanel.eps_50
3. Touch of each item to make settings.
Disabling Functions Other
Than Piano Performance
(Panel Lock)
The “Panel Lock” function locks the KR in a state where only
piano performance can be used, and all buttons will be
disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
* In the Panel Lock state, only the grand piano sound can be
played.
1.
Turn down the volume all the way.
2. Press the [Power] switch to turn off the power.
3. While holding down the [Wonderland/Game] button,
press the [Power] switch and turn on the power.
Hold down the button for at least ten seconds (until the
animation is displayed).
All buttons except for piano play are disabled.
Adjust the volume. When you play the keyboard, the
grand piano sound will be heard.
To undo the Panel Lock function, turn the volume down
to the minimum, and turn on the power once again.
Item Explanation
String
With an acoustic piano, playing a
note causes the strings for other keys
already being pressed to resonate.
The function that reproduces this
resonant sound is called “String
Resonance.”
Damper
When the damper pedal on an
acoustic piano is pressed, the sound
of the key that is played causes other
strings to resonate, adding rich
reverberation and breadth to the
sound. This function reproduces the
resonant sound created by pressing
the damper pedal (Damper
Resonance).
Key off
This reproduces the “key off” sound
(the subtle sound made when the
keys are released) produced when
playing an acoustic piano.
KR117_115_r_e.book 181 ページ ２００６年２月２７日 月曜日 午前１１時５５分