Making the connections – Roland KR-115 User Manual

Page 192

Advertising
background image

192

Chapter 11 Connecting External Devices

Chapter 11

Output Jacks (Main Output/Aux Output)

You can connect audio equipment using audio cables (sold
separately) and play the sounds from the KR through the
speakers on the connected equipment, or record your
performances on a recording device.
If the input of the connected device is monaural, you must
use the L (Mono) jack.

Input Jacks (Input/ Aux Input)

You can connect another sound generator, such as audio
equipment or an electronic instrument, using audio cables
(sold separately). Play the sounds from the connected device
through the speakers on the KR.
If the output of the connected device is monaural, you must
use the L (Mono) jack.

* You cannot use the KR to adjust the volume of the connected

sound generating device.

About the Output jack

922

This instrument is equipped with balanced (XLR) type jacks.
Wiring diagrams for these jacks are shown below. Make
connections after first checking the wiring diagrams of other
equipment you intend to connect.

Making the Connections

921

* To prevent malfunction and/or damage to speakers or other

devices, always turn down the volume, and turn off the power
on all devices before making any connections.

Playing Sounds from the KR Through the
Speakers on Audio Equipment or Recording
Your Performances on a Recording Device

fig.09-

1.

Turn the volume all the way down on the KR and on

the device you’re about to connect.

2.

Turn off the power to the KR and other connected

equipment.

3.

Use audio cables (sold separately) to make the

connection.

4.

Switch on the KR.

5.

Switch on the connected device.

6.

Adjust the volume level on the KR and the connected

device.

You can adjust the volume of a connected sound module with
the KR.

Recording KR Performances on a Recording Device

7.

Start recording with the connected device.

8.

Play the keyboard.

9.

When the performance ends, stop recording on the

connected equipment.

Turning off the power

1.

Set the volume of the KR and of the connected devices

to the minimum position.

2.

Turn off the connected equipment.

3.

Turn off the power to the KR.

Playing Audio Equipment Sounds Through the
Speakers on the KR

KR’s Jack Panel (Rear)

Input R/L

(Line In, Aux In)

KR’s Jack Panel (Rear)

Output R/L

(Line Out, Aux Out)

KR’s Jack Panel (Rear)

Output R/L

(Line Out, Aux Out)

KR117_115_r_e.book 192 ページ 2006年2月27日 月曜日 午前11時55分

Advertising
This manual is related to the following products: