Ricoh Aficio LD132c - Manual (Page 43)

Multi-Access
31
2
Multi-Access
You can carry out another job using a different function while the current job is
being performed. Performing multiple functions simultaneously in this manner
is called “Multi-accessing”.
This allows you to handle jobs efficiently, regardless of how the machine is being
used. For example:
• While making copies, you can scan documents to store in the Document Serv-
er.
• While printing documents stored in the Document Server, the machine can
receive print data.
• You can make copies while receiving fax data.
• While printing print data, you can make operations for copying.
Note
❒ See p.53 “Print Priority” for setting function priority. As default, [Display
Mode] is set to first priority.
❒ When the internal tray 2, shift sort tray, 500-Sheet finisher or 1000-Sheet fin-
isher is installed on the machine, you can specify the output tray where doc-
uments are delivered. For details about how to specify the output tray for
each function, see the following descriptions:
• p.54 “Output: Copier (copier)”
• p.55 “Output: Document Server (Document Server)”
• p.55 “Output: Facsimile (facsimile)”
• p.55 “Output: Printer (printer)”
- - - -Function Compatibility
The chart shows Function Compatibility when print priority is set to “Inter-
leave”. See p.53 “Print Priority”.
|: Simultaneous operations are possible.
$: Operation is enabled when the relevant function key is pressed and remote
switching (of the scanner/external extension) is done.
❍: Operation is enabled when the {{{{Interrupt}}}} key is pressed to interrupt the pre-
ceding operation.
→: Operation is performed automatically once the preceding operation ends.
×: The operation must be started once the preceding operation ends. (Simultane-
ous operations are not possible.)
ThemisC1_AE_zentai_pre_FM.book Page 31 Thursday, July 28, 2005 2:13 PM