Ricoh Aficio LD132c - Manual (Page 89)

Fax Destination
77
5
❒ You can program a standard
message other than those
registered in the machine.
See “Programming, Chang-
ing, and Deleting Standard
Messages”, Facsimile Refer-
ence <Advanced Features>.
• International TX mode
When setting the International
TX mode to [On], the machine
transmits more carefully by
lowering transmission speed.
H o w e v e r , c o m m u n i c a t i o n
times increase.
❖ ❖ ❖ ❖ IP-Fax Destination
You can program the following
items in an IP-Fax Destination:
Note
❒ This setting only works if the IP
fax function has been selected.
• IP-Fax
Register the IP-Fax destination.
You can register the name using
up to 128 characters. You must
make this setting when using
IP-Fax.
• SUB Code
Registering a SUB Code allows
you to use Confidential Trans-
mission to send messages to the
other fax machines which sup-
port a similar function called
“SUB Code”. See “SUB Code”,
Facsimile Reference <Advanced
Features>.
• SEP Code
Registering a SEP Code allows
you to use Polling Reception to
receive faxes from the other fax
machines which support Poll-
ing Reception. See “SEP Code”,
Facsimile Reference <Advanced
Features>.
• Select Protocol
Select the protocol for the IP-
Fax transmission.
Registering a Fax Destination
AAAA
Press the {{{{User Tools/Counter}}}} key.
BBBB
Press [System Settings].
CCCC
Press [Administrator Tools], and then
press [
T T T TNext].
DDDD
Press [Address Book Management].
EEEE
Select the name whose fax desti-
nation you want to register.
Press the name key, or enter the
r e gi st e re d n u m b er us in g t h e
number keys.
Note
❒ If you press , you can search
by the registered name, user
code, fax number, folder name
or e-mail address.
❒ To register the name, key dis-
play, and title, see p.70 “Regis-
tering a Name”.
FFFF
Press [Fax Dest.].
GGGG
Enter the fax number using the
number keys, and then press [OK]
under Facsimile No..
ThemisC1_AE_zentai_pre_FM.book Page 77 Thursday, July 28, 2005 2:13 PM