Setting the power saving mode – Ricoh CAMERA RDC-i500 User Manual
Page 114
Advertising
112
Setting the Power Saving Mode
This function enables you to reduce the power consumption of the LCD monitor
and extend the life of the battery.
A
Set the mode dial to [
].
B
Select [CAMERA SETTINGS] and
press the
button.
C
Select [POWER SAVE] and press the
button.
D
Select [ON] or [OFF] and then press
the ENTER button.
The screen will return to the Camera Settings
menu.
E
Press the CANCEL button to return to
the Setup menu.
Note
• When the power save mode is set to ON, focusing will take more or
less time than using the LCD monitor. Take care when focusing
through the viewfinder.
Advertising