Changing the video-out signal method (ntsc/pal) – Ricoh CAMERA RDC-i500 User Manual
Page 116

114
Changing the Video-out Signal Method (NTSC/PAL)
If you wish to play recorded files on a TV when you are abroad, change the
Video-out Signal Method according to the video system used in the country
where you are.
See
• “Playback Using a TV” (P.86) for instructions on how to connect the
camera to a TV
• “Using Your Camera in Other Countries” (P.133) for details of the TV
systems
A
Set the mode dial to [
].
B
Select [CAMERA SETTINGS] and
press the
button.
C
Select [VIDEO OUT MODE] and press
the
button.
D
Choose the video format (NTSC or
PAL) and then press the ENTER
button.
The video signal method will be changed and
the display will return to the Camera Settings
menu.
E
Press the CANCEL button to return to
the Setup menu.
Note
• Connecting the AV cable to the camera, when the signal method is set
to PAL, produces the rough image on the LCD monitor.