Ricoh CAMERA RDC-i500 User Manual
Page 62
60
■
Selecting Auto (AUTO), Daylight ( ), Overcast (
),
Tungsten Light ( ) or Fluorescent Light (
).
A
Set the mode dial to [
] or [
] and
press the WB button.
B
Choose the white balance (AUTO, ,
,
or
) and then press the
ENTER button.
C
Press the shutter release button to
record the image.
Note
• In AUTO mode, subjects lacking in white tones may not achieve an
appropriate white balance. When shooting such subjects, add a white
object to the composition.
• The flash will not fire when the white balance is set on
(daylight),
(overcast),
(tungsten light) or
(fluorescent light) mode.
• Enable the keep settings mode to save the white balance mode
setting.
→
P.108 “Keep Settings”
Important
Note
• Even with the same subject, colors may vary due to the weather
conditions and light source (tungsten light or fluorescent light).