Ricoh CAMERA RDC-i500 - Manual (Page 73)

71
3
Shooting
Shooting in Sharpness Mode (Sharpness)
This mode enables you to adjust the sharpness of the contours of the subject in
three stages (–1, 0 and +1).
A
Set the mode dial to [ ] and press
the MENU button.
B
Select [SHARPNESS] and press the
button.
C
Choose the desired level (–1 or +1)
and then press the ENTER button.
If you select –1, the image will be recorded
with soft contours. If you select +1, the image
will be recorded with sharp contours.
Note
• To cancel the sharpness mode,
select [OFF].
D
Press the CANCEL button to exit the
menu display.
E
Press the shutter release button to
record the image.
Note
• Enable the keep settings mode to save the sharpness mode setting.
→
P.108 “Keep Settings”