Ricoh CAMERA RDC-i500 - Manual (Page 125)

123
5
Camera Settings and Other Functions
Using the DR-3 Remote Control
■ Shooting
A
Set the mode dial on the camera to a
Recording mode (
, , or )
and press the button to select
the recording destination.
B
Decide the composition of the picture
and press the RELEASE button on
the remote control unit.
Press to make the subject larger, and
press to make the subject smaller.
● In (Still Picture) mode
The self-timer LED will light and recording
will start after about 2 seconds.
● In (Text) mode
Recording starts as soon as the RELEASE
button is pressed.
● In (Voice Memo) or (Motion Picture) mode
Recording of the image and/or voice memo
starts when the RELEASE button is pressed.
Recording stops when the button is pressed
again.
RELEASE
ERASE FWD PROGRAM
EV
MULTI
REV
ENTER
Setting the Exposure Compensation
A
Press the EV (+/–) button on the remote control unit.
B
Set the exposure compensation level using the FWD (
̅
) or REV (
̃
)
button and press the ENTER button on the remote control unit.
Press the RELEASE button to record the image.
Shooting in Manual Focus Mode
A
Press the PROGRAM button.
Each time you press the button, the mode changes as follows: AF
→
MF
→
SNAP ( S )
→ ϱ
.
B
Adjust the focus using the FWD (
̅
) or REV (
̃
) button.
Press the RELEASE button to record the image.
The indicator “MAGNIFY:FUNCTION” on the LCD monitor is not effective.
● To cancel the mode setting
Press the PROGRAM button to change to the other mode.