Ricoh CAMERA RDC-i500 - Manual (Page 43)

41
3
Shooting
Selecting a Recording Mode
The camera offers four recording modes ( · · · ). Select the mode best
suited to your photographic needs.
In this section,
(Still Picture) mode is used.
A
Set the mode dial to [ ].
See • P.25 “How to Use the Mode Dial”
The recording data will be displayed on the
LCD panel or LCD monitor.
● Switching the LCD Monitor Display
You can change the display on the LCD
monitor by pressing the DISPLAY button.
The display changes in the following
sequence each time the DISPLAY button is
pressed: Information display
→
Simple
display
→
Grid display
→
No display.
See
• “LCD Monitor Display (Recording
Mode)” (See below)
Tips
LCD Monitor Display (Recording Mode)
Press the DISPLAY button to display recording information such as
the recording mode, image quality mode, and picture count. Each
time you press the DISPLAY button, the display will switch in the
following order:
● In Still Picture mode
Information
Simple display
display
No display Grid display
Use the grid as
a guide to
compose the
sbject.