Roland TD-6 - Manual (Page 117)

117
Messages and Error Messages
Appendices
Song Lock ON!
fig.e-012_50
Song Lock is on for this song; it cannot be edited or recorded.
Set Song Lock to “OFF” (SONG/COMMON/Song Lock; p.
87).
Empty Song!
fig.e-013_50
This song contains no performance data; it cannot be edited.
No Empty Song!
fig.e-014_50
There are no empty songs for recording.
Try deleting songs that are no longer needed (SONG/
DELETE; p. 91).
New User Song Selected!
fig.e-015_50
Select a new User song automatically.
This is displayed when the following operations are carried
out.
• When pressing [SHIFT] + [STOP ] in the song screen
or the screen for selecting the copy destination in song
copy
• When [REC ] is pressed with a Preset song selected
Preset Song!
fig.e-015_50
This is the preset song; the settings cannot be changed.
Messages and Error Messages
Related to MIDI
MIDI Offline!
fig.e-005_50
Something has caused a break in communication with the
external MIDI device.
Check that MIDI cables have not been disconnected or broken.
Checksum Error!
fig.e-006_50
The checksum value of a system exclusive message was
incorrect.
Correct the checksum value.
MIDI Buffer Full!
fig.e-007_50
A large amount of MIDI messages were received, and could
not be processed completely.
Confirm that the external MIDI device is properly connected
(p. 105). If this does not resolve the problem, reduce the
amount of MIDI messages being transmitted to the TD-6.
Data Transmitting... Please, Wait.
fig.e-017_50
Bulk data is being transmitted in response to an external
request for transmission.
Bulk Data Transmit Aborted!
fig.e-018_50
The bulk dump has been cancelled.
Data Receiving... Please, Wait.
fig.e-019_50
Bulk data is being received. Do not turn off the power.