Roland TD-6 User Manual
Page 31
31
Selecting the Pad Type
Setup Guide
4
Strike the pad you wish to set.
The setting screen for the struck pad appears.
5
Select the most suitable trigger type from the following chart for the
pad you are using.
6
Press [INC/+] or [DEC/-] to select the trigger type.
7
Repeat Steps
4
–
6
to set the trigger type for each pad.
8
Press [KIT].
[KIT] lights, and the Drum Kit screen appears.
fig.P-017ai
9
Strike the pads and press the pedals to check the following.
• Are sounds being played with all pads and pedals?
• Is the right instrument for each pad being played?
If the correct sound is not being played, check the pad settings once more and
refer to “Troubleshooting” (p. 110).
Pad
Trigger Type
Pad
Trigger Type
PD-5
PD7/9
CY-6
CY6
PD-6
PD6
CY-12H
CY Type
PD-7
PD7/9
CY-14C
CY Type
PD-9
PD7/9
CY-15R
CY Type
PD-80
PD80/100
KD-5
KD7
PD-80R
PD80R
KD-7
KD7
PD-100
PD80/100
KD-80
KD Type
PD-120
PD120
KD-120
KD Type
You can also make the
selection by pressing
[SHIFT] + [
] or
[SHIFT] + [
] (Trigger
Select).
These settings apply to
both the head and the rim.