Roland TD-6 - Manual (Page 20)

20
Making the Settings
Connecting the Pads and the Pedals
Using the provided cables, connect the pads, cymbal pads, hi-hat control
pedal, and kick trigger unit.
Carefully refer to the numbers shown in the illustration and connect to the
appropriate TRIGGER INPUT jacks on the TD-6's rear panel.
Setting Example
fig.P-011.e
Before using pads with
mesh heads (PD-80, PD-
80R, PD-100, PD-120, KD-
80, or KD-120), be sure to
adjust the head tension.
Striking the head when the
head tension is loose may
damage the sensor. For
more information on
adjusting the head tension,
refer to the owner’s
manual for each pad.
For fullest performance
expression, make exclusive
use of Roland’s line of
optional pads (PD-5, PD-6,
PD-7, PD-9, PD-80, PD-
80R, PD-100, and PD-120),
cymbals (CY-6, CY-12H,
CY-14C, and CY-15R), and
kick trigger units (KD-7,
KD-80, and KD-120).
TRIGGER INPUT jacks