Naming the drum kit (kit name), Copying a drum kit (copy), Names (p. 69, p. 88) – Roland TD-6 User Manual

Page 69

Advertising
background image

69

Chapter 1 Creating Your Own Drum Kit (Kit Edit)

1

Naming the Drum Kit (Kit Name)

Each kit can be given a name of up to 8 characters.

Press [

] or [

] to move the cursor (under bar) to the

character you want to change, then press [INC/+] or [DEC/-]
to select the character.

• Holding down [SHIFT] and pressing [INC/+] switches

through the following sequence: uppercase alphabet ➝
lowercase alphabet ➝ 0 ➝ ! ➝ space. Holding down
[SHIFT] and pressing [DEC/-] switches through the
sequence in reverse order.

• Holding down [SHIFT] and pressing [

] deletes the

character at the cursor position and closes the resulting
space by shifting forward the characters that follow.

• Holding down [SHIFT] and pressing [

] inserts a space

at the character at the cursor position and shifts back the
characters that follow.

fig.01-051_50

KitName (Drum Kit Name): 8 characters

The following characters may be used.

fig.lettersai.e

Copying a Drum Kit (COPY)

You can copy the instrument, ambience, equalizer, and all
other settings in a drum kit.

Executing this operation deletes the content of the copy
destination, so check all content carefully before carrying out
this operation.

1.

Confirm that [CLICK] is not lit.

If this lights, press [CLICK] to extinguish it.

2.

Press [KIT], then [EDIT].

[KIT] and [EDIT] light.

3.

Press [

] to select “COPY.”

fig.KIT-COPY_50

4.

Press [ENTER

].

5.

Press [INC/+] or [DEC/-] to select the copy-

source drum kit.

fig.01-052ai.e

6.

Press [

].

The copy destination drum kit selection screen appears.

7.

Press [INC/+] or [DEC/-] to select the copy-

destination drum kit.

fig.01-053ai.e

8.

Press [ENTER

].

Press [EXIT] to cancel the operation.

fig.01-054_50

9.

Press [ENTER

] to execute the operation.

When you have finished copying the drum kit, the
Completed screen appears.

fig.01-055_50

10.

When you finish copying, press [KIT] to end the

procedure.

Src (Copy Source):
P01–P99 (Factory Setting Drum Kits),
U01–U99 (Drum Kits)

Select a drum kit marked with “

” as the copy source (P01–

P99) to restore original factory drum kits.

Dst (Copy Destination):
U01–U99 (Drum Kits)

space

Drum Kit Name

Drum Kit Number

Drum Kit Name

Drum Kit Number

Advertising