About the screen display, Notation used in the screen, About the input indicator – Roland TD-6 User Manual

Page 71: Selecting the pad type (trigger type), The pads, P. 71, The td-6 (setup; p. 71, p. 77, p, Chapter 2 making the pad and trigger settings, Setup/trig), Parameters that can be set here

Advertising
background image

71

2

Chapter 2 Making the Pad and Trigger Settings

(SETUP/TRIG)

Parameters That Can Be Set Here

fig.02-001.e

About the Screen Display

Notation Used in the Screen

Trigger input numbers and names are indicated in pad and
trigger settings screens.

fig.SETUP-BASIC

About the Input Indicator

The input indicator is indicated in the pad and trigger settings
screens as shown in the following. A flag is raised when the

indicator reaches the maximum position (

).

fig.P-020aai.e

Selecting the Pad Type

(Trigger Type)

To ensure that the TD-6 accurately receives signals sent from
the pads, be sure to specify the

trigger type

(the type of pads

being used).

Set each trigger input as described below.

Setting the trigger type allows the TD-6 to accurately detect
the force used to strike the pads and avoid secondary
sounding of a pad (retriggering). You can also set this up for
PD-80R and PD-120 rim shots.

After making the trigger type settings, adjust the pad
sensitivity and carry out other adjustments as needed.

When you set the Trigger Type, the following parameters are
automatically set to the most efficient values.
They should be adjusted as necessary to match the actual state
of your configuration and the environment in which it is being
used.

Basic Trigger Parameter

(SETUP/TRIG BASIC; p. 72)

• Sensitivity

• Threshold

• TrigCurve

Advanced Trigger Parameter

(SETUP/TRIG ADVNCD; p. 74)

• Scan TIme

• Retrig Cancel

• Mask Time

• Rim Sens

For the most suitable values for each trigger type, refer to p.
36.

1.

While holding down [SHIFT], press [EDIT

(SETUP)].

[EDIT] lights.

2.

Press [

] to select “TRIG BASIC.”

fig.SETUP-BASIC_50

Screen

Name

Screen

Name

KIK

KICK

T3

TOM3

SNR

SNARE

T4

TOM4

HH

HI-HAT

CR1

CRASH1

T1

TOM1

CR2

CRASH2

T2

TOM2

RD

RIDE

AUX

AUX

SETUP

TRIGGER BASIC (Pad Sensitivity Settings) (p. 72)

Trigger Type

Crosstalk Cancel

Threshold

Trigger Curve

Rim Sensitivity

Sensitivity

TRIGGER ADVANCED (Detailed Pad Settings) (p. 74)

Scan Time

Mask Time

Retrigger Cancel

Indicator

Indicator (Maximum)

Maximum Indication

Advertising