Roberts Radio CRD-42 - Manual (Page 13)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
12
Manual tuning - DAB
Manual tuning allows you to tune your radio to a particular DAB frequency
in Band III. Any new stations found will be added to the station list. This
function can also be used to assist the positioning the aerial or the radio
to optimise reception for a specific channel or frequency. Note that UK
DAB stations are located in the range of channels 11B to 12D.
1. Press and release the Menu button so that the display shows
"MANUAL". Press and release the Select button to enter the manual
tuning mode.
2. Press the Tuning Up or Down buttons to select the desired DAB
channel. Press and release the Select button to tune to the chosen
frequency.
3. If a signal is present, this will be indicated on a signal strength display.
The minimum signal marker ( ) shows the minimum signal strength
needed for good DAB reception. The signal indicator chevrons go
up or down showing the changing signal strength as you adjust the
wire aerial or your clock radio position. Press and release the Select
button again to return to the normal DAB tuning mode.
Signal strength display - DAB
1. Press and release the Select button to show the signal strength
display. The minimum signal marker ( ) shows the minimum signal
strength needed for good DAB reception. The signal indicator chevrons
increase or decrease showing the changing signal strength as you
adjust the wire aerial or your clock radio position.
2. Press and release the Select button to return to the normal radio
display.
1
1-3
2
2
1,2